|
 |
KUKA.OfficeLite |
|
|
|
|
| KUKA.OfficeLite allows you to create and optimize programs for KUKA robots offline on any PC.
KUKA.OfficeLite is practically identical to the standard KR C software. Through the use of the original KUKA user interface and KRL syntax, offline control and programming is exactly the same as when controlling and programming a real robot.
KUKA.OfficeLite requires no MFC and can thus be used on any PC or notebook. Programs can be transferred 1:1 from the KUKA.OfficeLite programming system to the robot – via a network or on floppy disk. | |
|
|
- This programming system has the same characteristics as the KUKA system software: Operator control and programming using the original KUKA user interface and KRL syntax with the full range of KRL commands.
- The full range of system software functions is available as for the given software release. No hardware-periphery interface is possible, however.
- Syntax check by available compiler and interpreter; creation of executable KRL application programs.
- Total control of robot application program sequences; this makes cycle time optimization possible.
- Program optimization - KUKA TechWare can be used and installed at any time. This means that you have complete original system software available on a standard PC – not an emulation!
- Original inputs can be simulated.
- KUKA.OfficeLite cannot be used to control a real robot.
| |
|
| KUKA.OfficeLite is primarily intended for offline application development. It can, however, also be used for:
- Simulation in conjunction with KUKA.Sim Pro
- Training
- Demonstration
- Controller development
- Application development
- SoftPLC runtime system (optionally MultiProg, ProConos required)
| |
|
|
|
|
- KUKA.OfficeLite is supplied on its own CD.
- Windows 2000, Windows XP or Windows Vista is not included on the CD.
- Installation program (multilingual), installation documentation (English, German, French).
- No KUKA technology packages are supplied.
- However, the KUKA technology packages of the robot can be installed on KUKA.OfficeLite in accordance with the appropriate (V)KRC software version.
PC, laptop, etc. with the following minimum configuration:
- Windows 2000 SP4, Windows XP SP2 or Windows Vista (Windows Vista Support is not yet available for all versions)
- (Note: 64-bit operating systems are not supported)
- Internet Explorer 5.x or higher
- Pentium processor, 400 MHz or more
- Single-processor, uni- and multi-processor modes are supported
- Min. 256 MB RAM required
- KUKA.OfficeLite must not be installed on the KUKA robot controller.
- KUKA.OfficeLite cannot communicate with external interfaces (e.g. serial interface, etc.).
- Due to the vast range of possible software and hardware configurations, KUKA Roboter GmbH cannot exclude the possibility of compatibility problems with other system or application software.
-
Available versions (no demo versions available!)
- KUKA.OfficeLite KRC V5.2 (Art. no.: 00-129-000)
- KUKA.OfficeLite KRC V5.3 (Art. no.: 00-151-441)
- KUKA.OfficeLite KRC V5.4 + Windows Vista Support (Art. no.: 00-169-314)
- KUKA.OfficeLite KRC V5.5 + Windows Vista Support (Art. no.: 00-167-779)
- KUKA.OfficeLite KRC V7.0 - KUKA Small Robots only (Art. no.: 00-151-407)
| |
|
|
|
|
|
|
|
|